What to know when purchasing an animal

When purchasing a SIMBA animal, there are quite a few things to be aware of and keep in mind. Use this info as a guide to help you make the right choices! 

Late in the last century we replaced the common SA Stud Book “mom and dad certificate” with our own five-generation performance pedigree certificate.  This piece of paper is of great value when making selection decisions:

1.  Objective performance information of thousands of Simbras together with extensive pedigree links coupled with modern computer technology has enabled us to express performance in a valuable figure called EBV.  The EBV is worldwide the best estimate of the genetic merit that the animal will pass on to its offspring.  We need to know how the progeny will perform not how different the bulls look!  The EBV’s are published on the certificate and in sale catalogues. Therefore, insist on the performance certificate.

2.  The certificate of a Simbra is not only associated with purity.  Since the breed society was established, a certificate is only issued to animals, which pass the breed expert’s visual appraisal or inspection.  Animals, which do not meet the requirements, don’t receive a certificate and they and their progeny are never registered. The Simbra performance certificate is proof that the animal and all it’s ancestors conform to the standard.  Therefore, insist on our performance certificate!

3.  On the five-generation performance certificate you will also find the country of origin, eyelid pigment, polled factor and the very important elite or star cow awards.  Therefore, insist on it!

1.  Animals that have passed inspection will have an inspection date. If the animal still needs to be inspected the certificate will specify so.
2.  Name of animal.
3.  Particulars of animal itself in square.
Top half: sire with his sire and dam and their ancestors – sire always upper side and dam lower side of animal. Lower half: dam with her sire and her dam and ancestors.
5.  Birth Status: S = Single, TW = Twin (beware: see 6)
TR = Triplet 
6.  Sex of twin M (bull) or F (female). With bull/heifer twin the heifer is infertile.
7.  “AI” if begotten by artificial insemination.
8.  Country of origin: ZA = South Africa
, NA = Namibia, DE = Germany, AT = Austria as well as other international two letter codes.
9.  Identification tattooed in the animal’s ear – check with ear.
10.  Herd Book section:  F1, F2, F3, 
SP and FC (cum).
= natural polled.
This line contains the breeding values (EBVs) of the animal.  This is the best prediction of how an animal’s progeny will perform. Below indicated with Ø is the breed’s average breeding value.

Breeding Values:
  Birth:  Birth weight (coupled to calving ease)  the lower (negative) the better. Ø (Stands for breed average) = 1.4
  200:  Weaning weight or pre-wean growth. Important for heavy weaners. Genetic related to 400 and 600 days. Ø 15
  400:  400 Day or yearling weight. Genetic related to 200 and 600 days. Ø 21
  600:  600 Day weight – beware for too high. Ø 28
  Cow:  Mature cow weight. Aim for average. This breeding value should be lower than the 600 days. Ø 28. Also compare this with the 200 days in order to determine relative weaning weight.
  Milk:  Milk of cows or bull’s daughters. Ø 4

13.  The breeding value (EBV) evaluation date – always ask for the certificate with the latest data. (The latest data can always be accessed via the website. Follow the EBV Enquiry link, enter the animal’s ID and click on search.)
14.  The accuracy or reliability of the breeding values: the higher these figure the better. Even an EBV with a low accuracy is a more accurate indicator of the animal’s genetic value than a performance test index or weight.
15.  Breeding values for (starting at the top) sire’s sire; sire; sire’s dam and below dam’s sire, dam and dam’s dam.
Animals that have been DNA tested will have a DNA profile number here. Compulsory for breeding bulls.

After joining the Society the following services are available to acquire females:

  Our Technical Advisors are at your service at all sales under the rules of the Society.

  Approach our Technical Advisors for private sales of inspected females – they visit every breeder in the country and try to maintain high selling standards.

  Contact breeders in your area and insist on objective information viz. EBV’s on the performance pedigree certificate and give preference to animals that passed the  Society’s inspection.

  If you have cross bred Simmentaler/Brahman (any blood share) we will arrange a visit of our Technical Advisor who will give you valuable breeding advise and register animals which comply to the visual standards in the Simbra F1 Herd Book.

Purchasing Tips

  Attendance of a training course is recommended.  The visually perceptible superior and inferior characteristics of animals are dealt with in detail.

  Always insist on the certificate: 1. an animal that has been approved and complies with the requirements of the breeders’ society will have an inspection date in the top right corner of the certificate (Animal inspected and approved on…); 2) an animal without an inspection date has not yet been inspected (calfbook) and may be rejected, but the certificate contains vital performance and breeding particulars; 3) an animal without a certificate has been rejected due to faults or the animal’s parent(s) were rejected.

  The tattoo marks in the animal’s ear must correspond with the identification marks reflected on the certificate.

  Make sure that the seller will inform the Society in writing to transfer the animal/s to your name – you cannot register progeny if this is not done.

  When purchasing cows the calving record is of great importance.  Avoid purchasing cows without an official calving record and ask for the seller’s SIMPRO list.

  When purchasing pregnant cows, the seller must furnish you with full details of the AI or service bull.


Our Breed Advisor will be present at sales which are advertised as “national” and “under the rules of the Society”. 


Members can import animals, semen and / or embryo’s provided the legal application form for an import permit is completed.  Consult the Society for advise on selection and import procedure.

The bull’s contribution to a beef herd is more than merely the servicing of cows …

    ■  his contribution is 25 to 35 times more than that of any cow;
    ■  the effect on the current herd of the few bulls used in the last three generations is 87%;
    ■  the bull can either improve or cause the calving crop to deteriorate more within one year than what years of selection of the cow herd can achieve.

From this it is clear that the purchase of a HERD BULL is of paramount economic importance and should be carried out with extreme caution.  Factors which should be taken into account in the selection of a bull are described herein.  The points are not listed in order of priority – they are all equally important and essential.

A Simbra bull may be classified in 1 of 3 groups – the choice is left to you, the buyer

Since the inception of the Simbra all bulls have been subjected to inspection by breed experts prior to registration on the basis of economically important breed standards.  Animals with defects or which do not conform to the standards are rejected, do not receive a certificate and their progeny will at no stage qualify for registration.  This inspection system is of great advantage to the bull buyer since all Simbras can be identified as follow: 

Class A bull:
Registration certificate = the bull and all his ancestors conform to the standards.  Only 3 out of every 10 bull calves from stud parents are classified in Class A.
Class B bull:
Calfbook certificate = proof that ancestors have passed inspection and are  registered, however, the bull itself has not yet been inspected – he could therefore still be rejected.
Class C bull:
No certificate (no paper) = the bull does not conform to the standards and has been rejected; one or both of his parents has/have been rejected; grade parent(s); his Calfbook or registration status has for some or other reason been cancelled in the Herdbook.

Therefore insist on the bull’s “ID-CARD” or certificate to establish whether the bull classifies under Class A, B or C.  The number reflected on the certificate is tattooed in the bull’s ear.

Sales talk such as “this is a pure bred Simbra bull but he does not have a paper” may cost you dearly.  All that is genuine about this bull is that he has been bred from a cow and a bull.  The bull buyer have decided on a Simbra bull with a view to transmitting breed qualities to his cow herd.  Many years of purposeful selection and inspection for the desired Simbra characteristics ensures that Class A bulls will transmit these characteristics to a great extent.

How to determine the value of a Simbra bull

“We must pay much more attention on how much a bull is worth, rather than how much he will cost.”

Bull buying is the most important investment that the beef bull buyer will make in his herd.  You must evaluate a bull on the same basis than investing money viz. return on an investment.

  1. The more life calves he will produce the lower the bull-cost-per-calf.  In order to produce many calves we must look at the following:
        (a)   fertility of semen quality;
        (b)   serving ability or libido;
        (c)   structural correctness (feed, hocks, sheath, testicle size and shape);
        (d)   look well after your bull and keep him in a good working condition.
        If the bull is functionally sound and happy in his environment he will produce many calves and therefore, a good return on the farmer’s investment.
  2. Now that the cows are pregnant we want a bull that produces life calves.  A big, heavy and coarse bull normally breed big calves the main course of calving problems.  The bull’s EBV’s (estimated breeding value)* for calving ease (must be high) and birth weight (must be low) are the best predictors of the ease with which his calves are born.*Published on Simbra performance certificates and all official sale catalogues.
  3. The next important criteria is to determine how hisprogeny will perform and not how much heavier or prettier he is compared to the other bulls on sale.  Seeing that he has not bred progeny yet, the only way to do this is to study his 200, 400 and 600 day EBV’s* . EBV’s measures the genetics that is passed on to the progeny and not how much food the bull got. *This valuable figure appears on the Simbra performance certificates and all official sale catalogues.
  4. The last aspect to consider in determining the real value of a bull, is his long term value viz. how will his daughters perform as replacement cows in the herd .  Not even the best judge can see how much milk a bull’s daughters will produce, how easy they will calf or how big they are going to be.  That is why clever bull buyers consider the  maternal calving ease, milk and and mature cow weight EBV’s which is published on the Simbra performance certificates and official sale catalogues.

Herd improvement takes place as follows

“To continue genetic improvement in a cow herd, each new sire should be superior to the last one.”

The only way to do this is by looking at the EBV’s on the Simbra performance pedigrees and catalogues because bulls is by means of this comparable OVER YEARS, SEASONS AND HERDS.

EBV’s using BLUP methodology have replaced the outmoded indices many years ago and are used universally as the foremost selection aid.  The weight of an animal is determined by environment (feed) and genes.  Blup separates environment from genetics and only the genetic transmissible traits are estimated.  Relationships between animals play a key-role in EBV’s and pedigrees are therefore essential in essential in establishing EBV.  The following EBV’s are published on all Simbra certificates and official sale catalogues:

    ■  Birth or BW:  Birth weight (coupled to calving ease ) = the lower or negative (minus) the better.
    ■  WW or 200:  Weaning or 200 day weight – important for breeding of heavy weaners.
    ■  WW or 400:  Yearling or 400 day weight – aim for high.
    ■  FW or 600:  Final or 600 day weight – beware for too high (too big).
    ■  COW or MCW:  Mature cow weight – aim for average en if middle-of-the-road cows is preferred the MCW should be lower as for 600 day EBV.
    ■  MILK:  Milk of bul’s daughters.

In the evaluation of EBV’s the accuracy (a % figure) must be taken into account – the higher the accuracy, the more accurate the EBV of the trait.  EBV’s with a low accuracy (below 75%) will most probably change as soon as new information becomes available.

What should he look like?

Judging of a bull should always occur from the ground upwards.

Firstly look at the hooves (large, closed, deep and uniform), pastern (elastic), hocks (broad, dry with correct angle), bone structure (not coarse) and stride (comfortable).  Should a bull pass this test, look at his tools – is his scrotum large enough and correctly formed – does he possess a controllable sheath which is not too large.  Finally examine the upper part of the body – clearly definable and well developed muscles (a well muscled forearm is always an indication of overall muscularity), well-sprung ribs (capacity), length of body and smooth haircoat.  Avoid bulls with prominent shoulders as well as bulls showing any signs of coarseness.  Lastly, colour has nothing to do with production.

A bull buyer need not be an expert – merely insist on the bull’s “ID-Card” (see page 1).  Class A or approved bulls have already been inspected by breed experts and conform to the  standards.  Class B bulls have not yet been visually appraised and could possess defects although their parents may be champions.  Class C bulls do not meet any requirements and must be avoided. 

Attendance of a Simbra course is strongly recommended. According to outsiders this is one of the best cattle training courses in the industry.  Application of the knowledge gained there could save bull buyers thousands of Rand. 

Elephants belongs in the game park

Nature does not tolerate extremes.

Due to the large variation in environment and management systems, a sound variation in size exists within the breed.  However, it is best to keep to the medium size framework.  An average size Class A bull is ideal for most commercial herds.  The chances are very good that a large and coarse bull will breed heavy calves resulting in calving problems.

However, in birth weight and calving ease EBV’s bull buyers have a powerful calving ease predictors.  These EBV’s are published on the certificate and all official sale catalogues. Select bulls with ….

… a low birth weight (abbreviated BW) and
… a high calving ease (abbreviated CED).

Don’t always blame the bull for calving problems.  Several cow-related factors play a role as well.  Overfed or thin cows are likely to have more difficult calvings and cows with flat rumps (no slope from hipbone to pinbone) give rise to increased calving problems.

Everything revolves around fertility

The importance of fertility or reproduction is 5 times higher than growth rate and 10 times higher than carcass qualities.

The main function of the bull is to serve females.  The bull must be in good working condition – fit instead of fat.  He must possess true sex characteristics, with a characteristic head, in other words, a bull must look like a bull.  A fertility certificate is of help and assures you that there was nothing wrong with the bull at the time of testing.

The bull’s walking ability and sheath should be above suspicion. Scrotum circumference is for several reasons important and all approved Class A bulls conform to the minimum measurements.

An annual sheath wash examination is essential in order to detect venereal diseases such as Vibriosis and Trichomoniasis, which could have an enormous negative effect on calving percentage.  Fertility examinations by a veterinarian must be carried out on all bulls prior to each breeding season.

Everything related to fertility is of prime importance.  Look at the dam’s calving record and avoid bulls from dams with irregular calvings, not to mention dams without calving records.

In order to simplify selection of all these dam-related qualities for the Simbra bull buyer, a star-cow or bull mother register has been instituted.  Cows which comply to high reproduction, milk production, and appearance standards are registered as one star (*), two star (**) or three star (***) and are identified on the Simbra certificate and official catalogues – again, insist on the certificate.  Fertility and star cow details are also available on our webpage.

Without milk no beef

Between 60-70% of the variation in the weaning weight of a group of calves can be attributed to the milk production of their dams.  How do you select a bull for milk production?It is easy, his milk EBV on the Simbra certificate or catalogue is a good prediction of his daughter’s milk production.

When, at what age and in what condition

The effect of adaptation (essential for sperm production) to a new environment lasts approximately 2 months and bulls should therefore be purchased a few months prior to the start of the breeding season.  Early purchase and good follow-up treatment is imperative.  In the majority of cases this also ensures “an early choice from a larger group of bulls”.

Depending on weight, a bull should not be used before the age of two years. Overworking decreases interest in cows or libido and a low calf harvest. Therefore, don’t make the mistake of using a bull at a young age simply because he is a few Rands cheaper.  You could loose thousands in cows that are not pregnant.

Over-feeding results in low or no fertility, difficult adaptation and bulls are not keen to do their job. A fat bull looks good (fat hides faults), but is not necessarily a good bull.  Over-fat bulls have a deep or full flank (full of fat – no muscular), a prominent brisket (full of fat) and fat around the tail-end and scrotum.

Unfortunately it frequently happens that the commercial bull buyer, who regularly criticises the stud breeder about over-fat bulls, gives preference to over-fat bulls, especially at sales.

Number of bulls required

Too many cows per bull has a detrimental effect on calving percentage and therefore income.  The number of breeding animals per bull will depend on several factors such as age of bull, feeding and duration of mating season.  A guideline for a three-month breeding season using 3 year old bulls is 25 cows per bull depending on the size of the camp.  Young two-year old bulls can only be used for ±15 cows.

With a ratio of 1 bull to 25 cows, a herd of 200 breeding animals will require 8 bulls and since the same bulls should not be kept in a herd for more than 3 to 4 years (inbreeding sire/daughter), 2 to 3 bulls will have to be replaced annually.  While on inbreeding – closely related animals (more than 6%) should not be mated – it is normally detrimental to all production traits.

Where to buy

Only breeders with approved or Class A bulls.  Give preference to breeders in the vicinity where the bull must serve.  These bulls are more adaptable to local conditions.  Details of these breeders in all regions of South Africa, Botswana and Namibia are available from our webpage or the office.

There are annually a number of sales where bulls are subjected to strict screening by qualified inspectors.

Purchase price

When purchasing a bull one should think in terms of his progeny – see “How to determine the value of a Simbra bull” above.  Remember the effect of using a unapproved bull will be evident for many years in your cow herd.  Although the bull only constitutes ±3% of the cow herd, he is responsible for 50% of the genetic composition of the calves.  The bull that you purchase will remain in your herd for 3-4 years and his daughters will have an effect on your profit/loss account for almost a decade.

A realistic price guideline which accordingly to experts applies to good and poor economic conditions, is that the bull’s price should be equivalent to the price of 4 to 5 fat slaughter cows.  The old adage “Penny wise pound foolish” should be borne in mind at the purchase of a bull.  An inferior bull is the most expensive product that a cattle farmer can buy. 

Superior approved Class A bulls normally breed superior progeny and therefore provide a higher income.  It is very difficult and takes years to get rid of the poor qualities in your cow herd bred by an in-expensive unapproved bull.

Care of the new bull

Consult the vet regarding the treatment and testing of your new bull.  In view of the fact that adaptation to a new environment and feeding has a major effect on a bull’s semen production and libido, this important investment necessitates proper feeding, care and management.  Especially young bulls which are still growing and shedding teeth should be well-cared for.

To become properly adapted to an area, bulls should be purchased at least one to two months before commencement of the breeding season.  The change-over from a high concentrate ration (prior to selling) to a high roughage diet (subsequent to purchase) must occur gradually.  Depending on the grazing conditions, a working bull should be fed a daily ration of good hay or maize silage and 0,5 kg concentrate per 100 kg live weight.  Also keep an eye on the bull for disease in the first few months.

The feeding and management of the most important investment of the beef farmer has a direct effect on the number of cows which will be successfully covered, and therefore, “the harvest” – look well after him.


Since the inception of the Society, selection by accredited breed experts has been a prerequisite for registration. In this system strong emphasis is laid on visual traits with functional merit. The phenotypical correctness or ”correct type“ is furthermore protected by this system. The breed experts act according to the approved breeding objects of the Society that are adjusted from time to time.

Animals that do not comply with the requirements are removed from the herdbook and even their progeny will never qualify for registration. Animals that are accepted receive a certificate with performance, pedigree and other particulars. In the top right-hand corner of the certificate is the inspection date. This certificate of a Simbra is therefore proof that the animal, as well as his ancestors, has been selected on rigid standards.

At inspection, the following receive special attention:

  • Walking ability is of primary importance in our low carrying capacity pasture areas. We look at the hooves (large, closed ,deep and uniform; pasterns (flexible), hocks (broad, dry with correct angle), bone structure (not coarse) and gait (easy).

  • Then our experts also look at the bull’s tools – is his scrotum large enough and correctly shaped? Does he have a controllable sheath that is not too long and is he masculine (all bull)? The sheath may not extend under an imaginary line between knee and hocks and we don’t want a prolapse or so-called lazy prepuce.

  • Cattle with the following features don’t stand a chance: Woolly or curly coats (perform poorly in hot, dry or moist tropical environments and are more susceptible to ticks); flat rump (preferable is a rump that slopes slightly from hip to pin bones); too large; undeep; unsatisfactory width; pony-type; lankiness; poor or excessive muscling (bulls) and other features that are spelled out in the breed standard.

Contact the office for your Simbra’s certificate ([email protected]):

(i) an animal that has been approved and complies with the requirements of the breeders’ society will have an inspection date in the top right corner of the certificate (Animal inspected and approved on…);
(ii) an animal without an inspection date has not yet been inspected (calfbook) and may be rejected, but the certificate contains vital performance and breeding particulars;;
(iii) an animal without a certificate has been rejected due to faults or the animal’s parent(s) were rejected.